Western PRO-FLO 2 Manuel du propriétaire télécharger pdf (Page 17)

Lit. No. 94417/94418 13 June 15, 2003

REMOVING THE SPREADER

In-Bed Mount

NOTE: Empty the hopper before removing the

spreader.

1. Disconnect the spreader wiring harness from the

vehicle wiring harness.

NOTE: Grease the electrical connections using

dielectric grease.

2. Install the plug cover over the vehicle harness plug.

3. Remove the hairpin cotter pins and hold-down pins.

4. Using a hoist or two people, tip the hopper

assembly forward and lift it off of the mount

assembly.

5. Loosen and remove the hold-down bolts from the

front of the mount assembly.

6. Remove the mount assembly from the vehicle.

7. Install the tailgate.

Spreader Wiring Harness

Vehicle Wiring Harness

Hold-down

Bolt

Hairpin Cotter

Hold-down

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Pas de commentaire

Western PRO-FLO 2 Manuel du propriétaire Page 17