June 15, 2003 2 Lit. No. 94417/94418
SAFETY INFORMATION
Before You Begin
• Park the vehicle on a level surface, place shift lever
in PARK or NEUTRAL and set the parking brake.
NOTE: Maintain proper belt tension for correct belt
functioning.
NOTE: Lubricate grease fittings after each use. Use
a good quality multi-purpose synthetic grease.
NOTE: Airborne noise emission during use is below
70 dB(A) for the spreader operator.
When tightening fasteners, refer to Torque Chart for the
recommended fastener values.
Torque Chart
NOTE: Identifies tips, helpful hints and
maintenance information the owner/operator
should know.
CAUTION
Indicates a situation that, if not avoided, could
result in damage to product or property.
WARNING
Indicates a potentially hazardous situation that,
if not avoided, could result in death or serious
personal injury.
WARNING
• Driver to keep bystanders minimum of 25 feet
away from operating spreader.
• Before working with the spreader, secure all
loose-fitting clothing and unrestrained hair.
• Before operating the spreader, verify all
safety guards are in place.
• Before servicing the spreader, wait for
conveyor or spinner to stop.
• Do not climb into or ride on spreader.
Recommended Fastener Torque
Chart (Ft.-Lb.)
Size
SAE
Grade 2
SAE
Grade 5
SAE
Grade 8
1/4-20
5/16-18
3/8-16
3/8-24
7/16-14
1/2-13
9/16-12
5/8-11
3/4-10
7/8-9
1-8
6
11
19
24
30
45
66
93
150
150
220
9
18
31
46
50
75
110
150
250
378
583
13
28
46
68
75
115
165
225
370
591
893
Metric Grade 8.8 (Ft.-Lb.)
Size TorqueSize
Torque
M 6
M 8
M 10
M 12
M 14
M 16
7
17
35
60
95
155
These torque values apply to fasteners
except those noted in the instruction.
WARNING
Overloading could result in an accident or
damage. Do not exceed GVWR or GAWR
ratings as found on the driver-side door
cornerpost of the vehicle. See Loading Section
to determine maximum volumes of spreading
material.
CAUTION
If rear directional, CHMSL light or brake
stoplights are obstructed by the spreader, the
lights shall be relocated, or auxiliary
directional or brake stoplights shall be
installed.
CAUTION
• Do not operate a spreader in need of
maintenance.
• Before operating the spreader, reassemble
any parts or hardware removed for cleaning
or adjusting.
• Before operating the spreader, remove
materials such as cleaning rags, brushes,
and hand tools from the spreader.
• While operating the spreader, use auxiliary
warning lights, except when prohibited by law.
• Tighten all fasteners according to the Torque
Chart. Refer to Torque Chart for the
recommended torque values.
CAUTION
Disconnect electric power before servicing or
performing maintenance.
CAUTION
DO NOT leave unused material in hopper.
Material can freeze or solidify, causing unit to not
work properly. Empty and clean after each use.
(28 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels